TTVJ Newsletter Signup!





PayPal Logo

  Home > Cables > Interconnect Cables >

DiMarzio High Definition Interconnect Cable



 
List Price: $89.00
Our Price: $89.00

Product Code: DIM0000213

Length

Cable Length:
1.5 FT
3 FT [Add $10.00]
4.5 FT [Add $20.00]
6 FT [Add $30.00]

Qty:  
Description
 

The DiMarzio High Definition cables are good interconnect cables at a great price. You'll find no better interconnect at this price point - the DiMarzio High Definition delivers clean, clear highs, sweet mids and solid tight bass.

These are ideal for entry level to mid level high end systems. If you are using the cheap interconnects that sometimes come with your components or just have poor interconnects, these will give you a surprising upgrade in sound. It a simple process really, just toss the cheapies in the trash and replaces with the High Definition interconnect and enjoy! They are a great value and are built to last.

 

Tired of audio cables that cost more than your whole system, but leery of the junk sold at the hi-fi chain stores? We were too! We've done as much wire R&D over the last two decades as anybody this side of NASA, so why not apply it to our stereo, theater and studio systems?

DiMarzio High Definition™ Interconnect Cables are the result of that research –constructed from 240 strands of Teflon®-insulated OFHC wire, the 16 AWG wire is silver soldered to high-quality gold-plated locking RCA connectors. Our cable has one 16-gauge for the plus and one 16-gauge for the minus, individually shielded from each other with the shield ground connected on the "send" side.

Better wire, better construction and better connectors! Now you can really hear what your hi-fi components sound like.

Specs

Wire Gauge: AWG 16 x 2 OFHC with Dacron Center Core (1.32 mm2) AWG 22 drain (.325 mm2)
Diameter: 0.35 in. (8.89 mm)
Insulation: FEP Fluoropolymer
Capacitance: 71 pF/ft (233 pF/M) balanced or single-ended
Shield & Material: Two independently 100% foil shielded balanced line conductors
Jacket & Material: PVC + Nylon Overbraid
Resistance: 4.4 ohm/1,000 ft (14.4 ohm/KM)
Inductance: 0.1 µH/ft (0.3 µH/M)
Termination Method: Silver Solder

Share your knowledge of this product. Be the first to write a review »