Grandioso C1X solo
All instruments start to breathe naturally
and dynamically on a inky black background of silence.
A gem of preamplifier created by the wisdom of Esoteric
Ultra Fidelity Attenuator System
Newly developed "Ultra Fidelity Attenuator System”
Concept
There are two main methods of volume control system employed in preampliï¬ers. The “stepped attenuator circuit,” which switches multiple fixed resistors to adjust the volume, is an ideal method for a preampliï¬er that pursues sound quality because of high reliability at the contact points and bringing out pure and direct sound quality. However, since the volume is defined by switching resistors, the circuit scale becomes too large for smooth volume adjustment. In contrast, another method, “variable resistor (potentiometer)” allows smooth, step-less volume adjustment. However, the signal path is longer, and the potential of deterioration of crosstalk between the left and right channels and deterioration of contact points exists due to aging. The newly developed “Ultra Fidelity Attenuator System” is the fruit of our pursuit of an ideal attenuator circuit that realizes smooth, step-less volume control of the “variable resistor”, while maintaining the excellent sound quality of the “stepped attenuator circuit”.
Attenuator module “UFA-1792”
The core of the Ultra Fidelity Attenuator System is the UFA-1792, our proprietary module that integrates a stepped resistor attenuator into an integrated circuit. The internal resistors can be switched in 0.1dB/1,120 steps, which means that the volume can be adjusted in astonishingly ï¬ne, nearly inï¬nite steps, compared to a typical attenuator module which offers about 0.5dB/100 steps. In addition, as an original module, everything from materials, layout and internal circuit patterns has been uncompromisingly scrutinized to achieve the resolution and tone quality beï¬tting a top-of-the-line preampliï¬er.
Amplifier module “IDM-01”
The heart of the preampliï¬er’s amplification circuit is our proprietary module “Integrated Discrete-Ampliï¬er Module IDM-01”. Carefully selected materials, circuit patterns, and layout, thoroughly implement the Esoteric’s sound philosophy, just like a discrete ampliï¬er, and the extremely short signal path which is the beauty of integrated circuits, allows dynamic and delicate ampliï¬cation of musical vibrancy.
Dual balanced circuits with 4 circuits per channel
Based on two original new module technologies (UFA-1792, IDM-01), a lot of materials suitable for a flagship model are employed. The Grandioso C1X solo is conï¬gured with a dual balanced preampliï¬er circuit that employs four Ultra Fidelity Attenuator System per channel. All input signals are balanced and internally transmitted with low impedance to minimize noise effects, while the dual balanced conï¬guration employing the best module technology is completely free from channel crosstalk and level balance issues; powerful, and above all, ï¬rmly transmits the vibrancy of music to the power ampliï¬er.
Ultimate Driving Power
Powerful power amplifier drive capability
Parallel-drive Esoteric-HCLD for driving amplifier
Many audiophiles have experienced the speakers started to “sing” immediately after changing the preamplifier. Audibly, the preampliï¬er has a great influence on the drive power of the speakers, and a good preampliï¬er will drive and control the speakers to the maximum level.
The Grandioso C1X solo maximizes the driving of the power ampliï¬ers by applying the largest possible amount of material to the output buffer ampliï¬ers. The output buffer ampliï¬er employs the Esoteric-HCLD (High Current Line Driver), which is renowned for its excellent drive capability and 180MHz wide range, and boasts an astonishingly high-speed slew rate of 2,000V/μs. This powerful buffer ampliï¬er is installed in a parallel conï¬guration for a single signal line, while the output buffer ampliï¬er has an independent power supply section, – with two dedicated large toroidal power transformers in independent left and right conï¬gurations. The C1X solo’s output buffer ampliï¬er, which boasts the powerful current output capability beï¬tting a flagship, fully powers the ampliï¬er and the speakers, conveying to the audience an unprecedented level of vibrancy.
Powerful power supply section
We believe that 70% of the sound quality of a preampliï¬er is determined by the design of the power supply section. The C1X solo consists of a total of ï¬ve main components: left and right input/output ampliï¬ers and a control section. All ï¬ve of these are powerfully driven by five independent power transformers for each section (audio system: toroidal core, control system: R core).
By separating the power supply components for each section and investing far more amount of materials than intrinsically required, mutual interference between circuit blocks is fundamentally eliminated, resulting in extremely pure and dynamic sound quality. In addition, carefully selected parts appropriate for a flagship model, such as the high-capacitance Grandioso custom block capacitors and Schottky barrier diodes, are employed in pursuit of high sound quality.
ES-Link Analog
With the flagship Grandioso amplifier models, Esoteric is breaking new ground by pushing the limits of fidelity in pre-preamp-to-amplifier signal transmission. Esoteric’s unique current transmission system “ES-Link Analog” is the ideal method for preamp to amplifier transmission where the signal level is extremely low. Compared to the conventional voltage transmission, it transmits approximately 100 times more current, making it less susceptible to noise and sending the full energy of the music to the amplifier.
Also, it is not affected by the impedance of the interconnects running between the preamp and amplifier, so it maintains a perfect integrity between the output signal of the preamp and the input signal to the amplifier.
Input amplifier
The input amplifier section, as well as the output amplifier section, is configured with complete dual mono/dual balanced circuits with independent left and right power transformers and rectifier circuits. Input signals are transmitted without loss by using Esoteric-HCLD buffer amplifiers for signal transfer from the input amplifier to the output amplifier. For the input switching, a switch with an FET element is employed instead of the conventional mechanical relay system. The FET element allows 12A instantaneous current and 3A constant current,and minimizes current loss.
The conventional mechanical relays add sonic coloration by using rare earth materials at their contact points, emit operation noises, and wear over time – the FET elements are totally free from these negative factors, sound neutral and are reliable all the time.
Ultra-low noise logic control
The logic control section, which controls operation and display, is shielded and housed in the front panel, isolated from the audio circuits. A photo-coupler that converts the control signal to optical signal for transmission is employed for connection to the preamplifier section to ensure physical and electrical isolation.
Furthermore, by completely shutting down the control circuitry except during operation, low-noise operation is achieved without affecting the audio circuitry. We improved operability by having the built-in program automatically lower the volume level to zero when the preamplifier is turned off, and automatically restore the level when the power is turned back on. We also aimed for a high-end operability that is full of elegance and a pleasure to use, such as fading out/fading in the music signal when switching inputs.
Chassis construction
To achieve the unique design goal of “reproducing the master sound,” the C1X solo chassis optimally controls all vibrations that can affect sound quality. The sleek and clean form of this sports car-like mechanical engineering, to pushes the limits of its balance between rigidity and flexibility, and speaks to its high degree of perfection.
For example, the enclosure, which requires rigidity, makes extensive use of aluminum blocks and is thoroughly non-resonant, while the top panel, which needs to be free of vibration for an open sound, has a semi-floating structure. Esoteric’s unique patented isolation foot, which integrates a spike and a saucer, also has a special mounting structure that reduces mechanical stress and enhances sound quality.
High-quality feeling that satisfies the pleasure of operation
The volume control and input selector employ solid construction knobs machined from an aluminum block. By adopting a bearing mechanism developed in the design of VRDS drive mechanisms for the rotary axis, extremely precise rotation without core shake is achieved. By adjusting the rotational torque to the optimum level, a smooth, analog-feeling operation is achieved, befitting Esoteric’s flagship preamplifier.
Double-face remote control
A compact and simple remote control is included that can also operate Esoteric digital source devices. The functional design features buttons used for each operation scenario on both sides of the remote control, and the smartphone-sized aluminum body, which fits comfortably in the hand, is achieved through advanced metal processing. Esoteric’s new approach is a design that allows you to experience thoughtful operability and craftsmanship every time you pick it up.
Spec description:
Analog Audio Inputs
XLR/ES-Link Analog × 3 pairs
Input Impedance 50kΩ
Input Sensitvity 500mV (at rated output)
Maximum Input Level 11.7V
RCA × 2 pairs
Input Impedance 500kΩ
Input Sensitvity 500mV (at rated output)
Analog Audio Outputs
XLR × 2 pairs
Output Inpedance 30Ω
Rated Output 2V
Maximum Output level 17V (1kHz, 0.003%)
ES-Link Analog × 2 pairs
Output Impedance 30Ω
Extrenal Control
RS-232C
Connector S-sub 9pin × 1
Trigger Input
Connector 3.5mm Monaural mini jack × 1
Input Level 12V, 2mA
Trigger Output
Connector 3.5mm Monaural mini jack × 2
Output Level 12V, Total 100mA maximum
General
Power
AC 120V, 60Hz
AC 220-240V, 50Hz
Power Consumption 22W
Standby Power 0.3W when RS-232C Remote control is disabled, 1.0W when enabled
Overall Dimensions (W×H×D) 445 × 132 × 449mm (including protrusions)
Weight 27.5kg
Included Accessories Power cord × 1
Remote control (RC-1334) × 1
AA batteries × 2
Felt pads × 4
Owner's manual × 1
Warranty card × 1
Audio performance
Frequency Response 1Hz to 150kHz (–3dB, XLR)
S/N Ratio 120dB (2V input, IHF-A, XLR)
Total Harmonic Distortion 0.00035%
Gain +12dB
