Home > Amplifiers > Headphone Amplifiers > Home and Desk Top Headphone Amplifiers >

Apex Pinnacle2 Headphone and Preamplifier

Apex Pinnacle2 Headphone and Preamplifier


 
Alternative Views:


List Price: $12,000.00
Our Price: $12,000.00


Product Code: AAA00000069
Qty:

Description
 

The Apex Pinnacle 2 and Pinnacle 2 Ultra

The Apex Pinnacle 2 and Pinnacle 2 Ultra are an evolution of the Apex Pinnacle headphone amp and preamp.

Like its predecessor, the Pinnacle 2 uses a single-ended two-stage amplifier circuit using a 6SN7 and two PX4 directly-heated triodes. The Pinnacle 2 Ultra uses the exquisite Emission Labs PX4 tubes.

Both the input and output signals are coupled through very high quality audio transformers, providing truly balanced inputs and outputs. New C-core output transformers are employed in the Pinnacle 2, with an amorphous core in the Ultra version. Three inputs are accommodated, from either balanced or unbalanced RCA or XLR connections. Three output impedance selections are available for both balanced and unbalanced headphones, and a preamp out mode drives both balanced and unbalanced outputs. The input and output selections are made via a front panel switches, which activate relays that are strategically located to keep the signal path direct and pure.

Although it uses the same basic circuit as the original Pinnacle, the Pinnacle 2 received many component upgrades, like a new medical-grade power transformer, as well as a number of aesthetic enhancements. The Pinnacle 2 Ultra includes several key upgrades from the Pinnacle 2, including silver foil paper-in-oil coupling capacitors and Spiral Groove Strange Attractor feet.

New Silver (P2) and Wine (P2 Ultra) finish knobs and transformer covers are cosmetic upgrades over the previous model.

Also added is a gain switch on the rear panel for ease in changing the gain of the Pinnacle!

Feature Summary

Original Pinnacle

Pinnacle 2

Pinnacle 2 Ultra

EI-core output transformer

Silicon Iron C-core transformer

Amorphous Iron C-core transformer

Sophia PX4 output tubes

Sophia PX4 output tubes

Emission Labs PX4 output tubes

Tung-Sol 6SN7 input tube

Tung-Sol 6SN7 input tube

NOS US 6SN7WGT input tube

Copper foil PIO capacitors

Copper foil PIO capacitors

Pure silver foil PIO capacitors

24-step attenuator

47-step attenuator

47-step attenuator

Rubber Feet

Machined Aluminum/w Rubber

Spiral Groove Strange Attractors

Exposed Transformers

Black and Silver Powder Coated Cover

Black and Gold Powder Coated Cover

Pinnacle 2 Specifications

  • Tube complement: Input - one 6SN7 • Output - two PX4, Sophia (standard) or Emission Labs (Ultra)
  • Inputs: Three, all with XLR and RCA connectors, balanced or unbalanced
  • Line output:XLR and RCA, balanced or unbalanced
  • Volume control:High quality 47-step attenuator
  • Headphone outputs: 1/4" TRS unbalanced, 4-pin XLR balanced • Can drive loads from 16 ohms and up.
  • Dimensions:Amplifier - 17" wide x 3" tall x 11" deep • Power supply - 17" wide x 3" tall x 11" deep
  • Power: 120V or 240V, 50/60Hz, 100 Watts
  • Maximum gain: High Impedance: 27dB
  • Low impedance: 21dB
  • IEM: 6dB
  • All can be reduced by 6dB via rear panel gain selection switch
  • Maximum output High Impedance into 150 ohms: 27V RMS
  • Low impedance into 32 ohms: 10V RMS
  • IEM into 16 ohms: 1.6V RMS
  • Frequency response20Hz – 40kHz +/- 0.5dB

Share your knowledge of this product. Be the first to write a review »