Representing the next generation in a proud lineage of audio
excellence, the C-02X Stereo Linestage Preamplifier and S-02 Stereo
Power Amplifier feature state-of-the-art circuitry in a discrete dual
mono configuration that dramatically conveys all the power and energy of music.
Assembled one at a time in Esoteric's Tokyo factory and incorporating
all the knowledge and technology of the flagship Grandioso line,
these two new models accentuate the refined qualities of audio
reproduction with expert craftsmanship and
The preamplifier is a crucial component that determines the 'sound' of an audio system, and represents the passion and commitment of its makers. As the crowning achievement of the Esoteric Sound, the Grandioso C1 opened new horizons for 'Made in Japan' preamplifiers. Now, this expressive power gives birth to the next-generation C-02X; a stereo preamplifier created to transcend the concept of high fidelity and resonate with the refined sensibilities of engineers and musicians alike.
Independent Dual Mono Design
The C-02X's DC power supply features a fully independent dual mono design that completely eliminates inter-channel interference. Its dedicated bank of five generously rated power transformers for each channel also blocks noise from the power line, enabling a pure, natural amplified sound. Grandioso technology reveals itself in such detailed refinements as the careful layout of the power supply circuit boards, which further contribute to the C-02X's superb sound quality.
Fully-Balanced Configuration Provides Excellent S/N Ratio
The preamplifier's source signal is first received by dedicated buffer amplifiers integrated with each input, from which the circuit configuration is balanced at each stage. Through the elimination of common-mode noise and reductions in circuit impedance, a pure, noise-free signal is fed to the gain amplifiers via the shortest path possible, for an exceptionally high signal-to-noise ratio.
The C-02X's Esoteric-QVCS* volume control employs four precision switched resistor ladder networks, which change in unison as the volume knob is rotated. This arrangement allows the signal paths for the left and right channels and their positive and negative phases to be kept totally independent and as short as possible. Consequently the sound has superb clarity, excellent channel separation and highly accurate phase characteristics. The elimination of audio board wiring to the volume control further contributes to a reduced signal path, while preventing degradation of sound quality and helping to maintain the low distortion one would expect of a reference model.
*: QVCS: Quad Volume Control System
Ultra-Low-Noise Logic Control
Built into the front panel, the logic control section is totally isolated, both physically and electronically, from the preamplifier module by way of an optocoupler. To assure low-noise operation, it also shuts completely down when not in actual operation, thus eliminating all possible influence on the C-02X's audio circuitry.
Highly Responsive Low-Noise, Low-Impedance Power Circuit
Five independent high-capacity power transformers, coupled with large banks of reservoir capacitors, provide power supply circuits that have exceptionally low output impedances and very clean and stable outputs. The low-noise silicon carbide (SiC) Schottky barrier diodes used in the high-speed rectifier circuit further enhance resolution and the signal-to-noise ratio for significant improvements in sound quality.
Esoteric-HCLD* Output Buffer Boosts Current Transmission While EDLC* Power Supply Ensures High Stability
As a line driver, the preamplifier must be able to fully drive the power amplifiers and faithfully convey the music signal's wide dynamic range. The key to achieving this is a circuit that provides both high current drive capability and high speed. The C-02X's output buffer circuitry delivers an exceptionally high current drive coupled with a high slew rate of 2,000V/μs for sharp response. Independent buffer circuits for each output and symmetrical circuitry for both the hot and cold phases of the XLR outputs maximize instantaneous output current capability.
Located closest to the output buffer circuitry, the EDLC* Super Capacitor array, originally developed for the Grandioso C1, was adapted as a highly stable power source. Its compact physical size belies the extraordinary 100,000μF (0.1F) capacity it provides each channel, for high levels of instantaneous output power and strong, steady bass reproduction. Integrating these two technologies, the C-02X preserves musical dynamics that would otherwise be lost if smaller current transmission levels were employed between the pre and power amplifiers, allowing it to reproduce a breathtaking level of audio reality.
High-Precision Ball Bearing Controls
The C-02X's elegant volume and input selector knobs are machined from solid blocks of aluminum. Like the Grandioso C1, their control shafts use a VRDS drive mechanism bearing system for high-precision rotation, with no mechanical play in their movements. Rotational torque has also been fine-tuned to provide a luxurious analog control feel in keeping with this high-end preamplifier.
Analog audio output Connectors RCA x 3 pairs (RCA 2 can be used as an AV pre-input)
XLR x 2 pairs Input impedance LINE :10kΩ Input sensitvity 510mV (at rated output)
200mV (at 800mV output) Maximum input level 12V Analog audio output Jacks XLR jacks x 2 pairs RCA jacks x 2 pairs Output impedance XLR: 47Ω RCA: 100Ω Maximum output leve
(1 kHz, full scale, 10 k ohms) XLR: 15Vrms RCA: 7.5Vrms Frequency response 1Hz to 200kHz (-3dB)) 3Hz - 50kHz (-0.2dB) Signal-to-noise ratio (S/N) 116dB Total harmonic distortion 0.0006% (RCA) 0.0004% (XLR) General Power supply USA/CANADA AC 120 V, 60 Hz Power consumption 21 W External dimensions
(W x H x D) 445 x 162 x 457 mm (17 5/8" x 6" 1/2 x 18") (including protrusions) Weight 32 kg (70 5/8 lbs) Accessories Remote control unit (RC-1315) x 1
Batteries (AAA) x 2
Power cord set x 1
Felt pads x 4
Owner's manual x 1
Warranty card x 1