Home > By Manufacturer > SME >

SME Model 15 Turntable w/309 Arm or Series V Arm
SME Model 15 Turntable w/309 Arm or Series V Arm


 


Product Code: SME0000001
Call to Order 406 285 3910
Ask a Question

Description
 
The SME Model 15 is available with 2 of their fine tonearms - the 309 or the Series V.

The Model 15 could be described as “the ultimate in recovery vehicles”, allowing the cartridge to retrieve the last iota of recorded material from the vinyl disc; approaching the ultimate in perfection.

Receiving its inspiration from the superb Model 10 precision turntable, the Model 15 seeks to emulate the excellence of the Models 20/3 and 30/2 turntable while retaining the more compact footprint preferred by many enthusiasts.

The Model 15 has been designed with the same attention to detail combined with simplicity of operation that has come to be expected from all SME products. Its superb performance together with laid back styling make it a glamorous addition to your sound system that will astound and amaze listeners for many years to come.

The main spindle is 19 mm (3/4″) machined from high chrome tool steel, it is ground, super finished and supported in a sealed housing with individually fitted sintered bronze bearings of generous proportions needed to support the
platter.

Arm

Standard arm mountings suit all SME 9" and 10" arms.
Suspension

The Model 15 sub-chassis is suspended on 30 purpose moulded ‘O’ rings and weighs, together with the platter, more than 24 lbs, thus meeting all the requirements of high density construction that is required to maintain freedom from
coloration.

Damping

Controlled by a central fluid damper which controls the sub-chassis motion, offers a resistive ground path for acoustic signals, eliminates overshoot and gives almost zero ‘Q’ recovery.

Platter

Machined from aluminium alloy and weighs over 10 lbs. It is extensionally damped, the top surface being diamond-turned
with a fine scroll. This method of finishing contacts a myriad of tiny fibres with the underside of the record, firmly coupling it to the platter. A substantial reflex clamp ensures the largest possible platter contact even when an appreciable record warp is present.

Motor

The turntable is driven by a 3 phase, brushless outrunner motor with 8-pole Neodymium magnets and 3 integrated Hall effect sensors and virtually vibrationless by reason of its 5.5 lbs weight as well as being isolated on urethane mounts that are adjustable for accurate belt positioning.

Speed Control

The electronic controller uses a high performance microprocessor, optimized for motor control. Closed loop speed control is implemented using a proportional plus integral (PI) algorithm. Fine pitch speed adjustment allows increments/decrements of +/-0.01% of selected speed. Speed ranges: 33.3, 45 & 78 rpm.

Dimensions and Weight

Dimensions: 12" x 10.7" x 5"
Net weight: 40 lbs
Shipping weight: 53 lbs

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

By Manufacturer > SME
Turntables