Home > Turntables >

Shinola Runwell Turntable USED

Shinola Runwell Turntable USED


 
Alternative Views:


List Price: $2,500.00
Our Price: $1,250.00
Savings: $1,250.00


Product Code: USE9000061
Qty:

Description
 
We took this unit on a trade in and have tested it and think pretty highly of it! Lists for $2500 so you can get it for half price. In very good condition. We can also add and mount a Grado cartridge (new) if you would like a new cartridge on the table.

The Rose Gold Runwell Turntable, designed inside and out for the discriminating audiophile and easy to use by any music enthusiast. Featuring a built in phono preamplifier and a belt driven pulley with speeds of 33 1/3 rpm and 45rpm.

Wow and Flutter < 0.1%
Gain 35.4db @ 1KHz
RIAA Conformance Deviation
Less than +/- 0.25db, 20Hz to 20 KHz, exclusive of infrasonic filter at 13Hz
Input Overload > 200mv at 1KHz
Input Impedance 47kohm in parallel with 200pf
Signal-to-noise Ratio exclusive of cartridge intrinsic noise, unweighted > 82db
Gain 1kHz MM 35.4dB (jumpers open)
Gain 1kHz MC 55.1dB (jumpers installed)
Termination impedance, MM gain resistive 47kohm, via synthetic cooled termination
Equivalent temperature of 47kohm input termination, midband < 20 degrees Kelvin
Termination impedance, capacitive 200pF on board
Termination impedance, MC gain resistive installed on input pads per cartridge requirements
EQ characteristic RIAA standard
Infrasonic filter Second-order maximally-flat, -3dBr at 13Hz
Line-level output resistance 49.9 ohms, unmated
Overload margins > 32dB at any frequency from 20Hz to 20kHz, based on reference levels of 5mV rms at 1kHz, 500uV rms at 20Hz, 50mV rms at 20kHz
Output noise, MM gain, at various analyzer filter bandwidths and 75 ohm generator Z 22Hz to 22kHz: 22uV rms
100Hz to 22kHz: 12uV rms
400Hz to 22kHz: 8.6uV rms
Output noise, MC gain, 10 ohm generator Z 22Hz to 22kHz: < 220uV rms
100Hz to 22kHz: < 120uV rms
400Hz to 22kHz: < 86uV rms
Power consumption from mains input, preamp only enabled < 8W
Distortion at noise-versus-distortion inflection point < 0.001%
Dimensions 18” x 13.875” x 7.5” (47.6cm x 35.2cm x 19cm)

Share your knowledge of this product. Be the first to write a review »