{"product_id":"atc-scm200aslt-active-tower-speakers","title":"ATC SCM200ASLT Active Tower Speakers","description":"\u003cdiv class=\"gl-pdp\"\u003e\n\n  \u003c!-- INTRO --\u003e\n  \u003cdiv class=\"gl-grid\"\u003e\n    \u003cdiv class=\"gl-block gl-intro gl-w6\"\u003e\n      \u003ch3\u003eATC SCM200ASLT: Twin 12-Inch Active Tower\u003c\/h3\u003e\n      \u003cdiv class=\"gl-body\"\u003e\n        \u003cp\u003eThe ATC SCM200ASLT is a three-way active floorstanding loudspeaker from ATC's Tower series, built around twin 12-inch Super Linear bass drivers, ATC's 75 mm Super Dome midrange and a 25 mm dual-suspension S-Spec soft-dome tweeter. Its cabinet is just 398 mm wide. Each speaker is driven by its own ATC P4: a rack-mount, four-channel Class AB amplifier with built-in active crossovers that sends 275 W to each bass driver, 200 W to the midrange and 100 W to the tweeter, 850 W per speaker.\u003c\/p\u003e\n        \u003cp\u003eYou add a preamp or a source with a variable XLR output. There's no power amplifier or speaker crossover to buy: the two P4 amplifiers handle both. Prefer to use your own power amplifier? See the passive version, the \u003ca href=\"https:\/\/www.ttvjaudio.com\/products\/atc-scm200pt-passive-tower-speakers\" target=\"_blank\" rel=\"noopener\"\u003eATC SCM200PSLT\u003c\/a\u003e.\u003c\/p\u003e\n        \u003cdiv class=\"gl-gain\"\u003e\n          \u003cdiv\u003e\n\u003cstrong\u003eDesign\u003c\/strong\u003e3-way active tower, twin 12\" SL bass\u003c\/div\u003e\n          \u003cdiv\u003e\n\u003cstrong\u003eAmplification\u003c\/strong\u003eATC P4 per speaker, 850 W, XLR input\u003c\/div\u003e\n          \u003cdiv\u003e\n\u003cstrong\u003eBass Extension\u003c\/strong\u003e32 Hz (−6 dB, free-standing)\u003c\/div\u003e\n          \u003cdiv\u003e\n\u003cstrong\u003eMax. SPL\u003c\/strong\u003e118 dB continuous at 1 m\u003c\/div\u003e\n          \u003cdiv\u003e\n\u003cstrong\u003eSlim Cabinet\u003c\/strong\u003e398 mm wide, 535 mm deep\u003c\/div\u003e\n          \u003cdiv\u003e\n\u003cstrong\u003eP4 Placement\u003c\/strong\u003e5U rack unit, 5 m cable (up to 20 m)\u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cp class=\"gl-note\"\u003e\u003cstrong\u003eTTVJ is an authorized ATC dealer.\u003c\/strong\u003e Every unit we sell is brand new, and Todd's advice comes from setting up ATC loudspeakers in real listening rooms.\u003c\/p\u003e\n        \u003cdiv class=\"gl-cta\"\u003e\n          \u003ca class=\"gl-btn\" href=\"tel:+14062853910\"\u003eCall Todd: 406‑285‑3910\u003c\/a\u003e\n          \u003ca class=\"gl-btn gl-btn-alt\" href=\"https:\/\/www.ttvjaudio.com\/pages\/contact\"\u003eAsk a Question\u003c\/a\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- IS IT RIGHT FOR YOU --\u003e\n  \u003cdiv class=\"gl-grid\"\u003e\n    \u003ch2 class=\"gl-section-title\"\u003eIs It Right for You?\u003c\/h2\u003e\n    \u003cdiv class=\"gl-block gl-w3\"\u003e\n      \u003ch3\u003eA Great Fit If You Want\u003c\/h3\u003e\n      \u003cdiv class=\"gl-body\"\u003e\n        \u003cul class=\"gl-yes\"\u003e\n          \u003cli\u003eA complete active system: speakers, amplifiers and crossovers matched by ATC.\u003c\/li\u003e\n          \u003cli\u003eAn active crossover that splits the signal before the amplifiers, so each of the four drivers per speaker has its own amplifier channel with no passive crossover in between.\u003c\/li\u003e\n          \u003cli\u003eTwin 12-inch bass drivers in a cabinet only 398 mm wide, driven by 850 W per speaker.\u003c\/li\u003e\n          \u003cli\u003eHigh output: 118 dB continuous at 1 m.\u003c\/li\u003e\n          \u003cli\u003eAmplifiers that can sit in a rack or on shelving away from the speakers.\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"gl-block gl-w3\"\u003e\n      \u003ch3\u003eConsider Something Else If You Need\u003c\/h3\u003e\n      \u003cdiv class=\"gl-body\"\u003e\n        \u003cul class=\"gl-no\"\u003e\n          \u003cli\u003eTo use your own power amplifier: the passive \u003ca href=\"https:\/\/www.ttvjaudio.com\/products\/atc-scm200pt-passive-tower-speakers\" target=\"_blank\" rel=\"noopener\"\u003eSCM200PSLT\u003c\/a\u003e (see the comparison below).\u003c\/li\u003e\n          \u003cli\u003eBass to 25 Hz and more output: the \u003ca href=\"https:\/\/www.ttvjaudio.com\/products\/atc-scm300aslt-active-tower-speakers\" target=\"_blank\" rel=\"noopener\"\u003eSCM300ASLT\u003c\/a\u003e, with twin 15-inch drivers and the same P4 system.\u003c\/li\u003e\n          \u003cli\u003eAmplifiers built into the speaker, with no rack or shelf space for two 5U amplifiers: the \u003ca href=\"https:\/\/www.ttvjaudio.com\/products\/atc-scm150a-active-classic-speakers\" target=\"_blank\" rel=\"noopener\"\u003eSCM150A Classic\u003c\/a\u003e.\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- DESIGN --\u003e\n  \u003cdiv class=\"gl-grid\"\u003e\n    \u003ch2 class=\"gl-section-title\"\u003eDesign\u003c\/h2\u003e\n    \u003cdiv class=\"gl-block gl-w2 gl-t2\"\u003e\n      \u003ch3\u003eTwin 12 in SL Bass\u003c\/h3\u003e\n      \u003cdiv class=\"gl-body\"\u003e\n        \u003cp\u003eTwo full-spec 314 mm bass drivers with ATC's Super Linear (SL) magnet technology, each on its own 275 W amplifier channel. Free-standing, the response reaches 32 Hz (−6 dB).\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"gl-block gl-w2\"\u003e\n      \u003ch3\u003e75 mm Super Dome Mid\u003c\/h3\u003e\n      \u003cdiv class=\"gl-body\"\u003e\n        \u003cp\u003eATC's soft-dome midrange covers 380 Hz to 3.5 kHz on its own 200 W channel, the range where voices sit.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"gl-block gl-w2\"\u003e\n      \u003ch3\u003e25 mm S-Spec Tweeter\u003c\/h3\u003e\n      \u003cdiv class=\"gl-body\"\u003e\n        \u003cp\u003eA dual-suspension S-Spec soft-dome tweeter takes over above 3.5 kHz on a 100 W channel, with thermal protection.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"gl-block gl-w6\"\u003e\n      \u003ch3\u003eOne ATC P4 Amplifier Per Speaker\u003c\/h3\u003e\n      \u003cdiv class=\"gl-body\"\u003e\n        \u003cp\u003eEach speaker comes with its own ATC P4, a four-way mono-block amplifier made only for ATC active systems. It holds the three-way active crossover (380 Hz and 3.5 kHz, 4th order) and four Class AB amplifiers built on ATC's grounded-source design: 275 W for each bass driver, 200 W for the midrange and 100 W for the tweeter. The P4 is a 19-inch, 5U rack unit weighing 35.8 kg, and it connects to its speaker with one 8-way cable. Full P4 specifications are listed under Specifications.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- ACTIVE VS PASSIVE --\u003e\n  \u003cdiv class=\"gl-grid\"\u003e\n    \u003ch2 class=\"gl-section-title\"\u003eSCM200ASLT vs SCM200PSLT\u003c\/h2\u003e\n    \u003cdiv class=\"gl-block gl-w6\"\u003e\n      \u003ch3\u003eActive or Passive: The Differences\u003c\/h3\u003e\n      \u003cdiv class=\"gl-body\"\u003e\n        \u003cp\u003eThe SCM200ASLT and the passive \u003ca href=\"https:\/\/www.ttvjaudio.com\/products\/atc-scm200pt-passive-tower-speakers\" target=\"_blank\" rel=\"noopener\"\u003eSCM200PSLT\u003c\/a\u003e share the same cabinet, drivers and finishes. They differ in how they are driven:\u003c\/p\u003e\n        \u003cdiv class=\"gl-scroll\"\u003e\n          \u003ctable class=\"gl-compare\"\u003e\n            \u003cthead\u003e\n              \u003ctr\u003e\n\u003cth\u003eDifference\u003c\/th\u003e\n\u003cth class=\"gl-on\"\u003eSCM200ASLT\u003c\/th\u003e\n\u003cth\u003eSCM200PSLT\u003c\/th\u003e\n\u003c\/tr\u003e\n            \u003c\/thead\u003e\n            \u003ctbody\u003e\n              \u003ctr\u003e\n\u003cth\u003eAmplification\u003c\/th\u003e\n\u003ctd class=\"gl-on\"\u003eOne ATC P4 per speaker, 850 W (included)\u003c\/td\u003e\n\u003ctd\u003eYour own power amplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n              \u003ctr\u003e\n\u003cth\u003eCrossover\u003c\/th\u003e\n\u003ctd class=\"gl-on\"\u003eActive, inside the P4, 4th order\u003c\/td\u003e\n\u003ctd\u003ePassive, inside the speaker, 2nd order\u003c\/td\u003e\n\u003c\/tr\u003e\n              \u003ctr\u003e\n\u003cth\u003eConnection\u003c\/th\u003e\n\u003ctd class=\"gl-on\"\u003eBalanced XLR from a preamp, 2 V\u003c\/td\u003e\n\u003ctd\u003eTri-wire binding posts\u003c\/td\u003e\n\u003c\/tr\u003e\n              \u003ctr\u003e\n\u003cth\u003eSensitivity \/ impedance\u003c\/th\u003e\n\u003ctd class=\"gl-on\"\u003en\/a\u003c\/td\u003e\n\u003ctd\u003e91 dB\/W\/m, 8 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n              \u003ctr\u003e\n\u003cth\u003eMax. SPL (1 m)\u003c\/th\u003e\n\u003ctd class=\"gl-on\"\u003e118 dB\u003c\/td\u003e\n\u003ctd\u003e117 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n              \u003ctr\u003e\n\u003cth\u003eWhat you connect\u003c\/th\u003e\n\u003ctd class=\"gl-on\"\u003eA preamp or source with a variable XLR output\u003c\/td\u003e\n\u003ctd\u003eAn integrated amplifier, or a preamp and power amplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n              \u003ctr\u003e\n\u003cth\u003eSpace and power\u003c\/th\u003e\n\u003ctd class=\"gl-on\"\u003eTwo 5U P4 amplifiers (included), each with its own mains connection\u003c\/td\u003e\n\u003ctd\u003eYour amplifier (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n            \u003c\/tbody\u003e\n          \u003c\/table\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"gl-block gl-w3\"\u003e\n      \u003ch3\u003eChoose the SCM200ASLT If You\u003c\/h3\u003e\n      \u003cdiv class=\"gl-body\"\u003e\n        \u003cul class=\"gl-yes\"\u003e\n          \u003cli\u003eWant a complete system without buying a power amplifier: ATC's P4 amplifiers and active crossovers are included.\u003c\/li\u003e\n          \u003cli\u003eWant each driver on its own amplifier channel, with no passive crossover between amplifier and driver.\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"gl-block gl-w3\"\u003e\n      \u003ch3\u003eChoose the SCM200PSLT If You\u003c\/h3\u003e\n      \u003cdiv class=\"gl-body\"\u003e\n        \u003cul class=\"gl-yes\"\u003e\n          \u003cli\u003eAlready own, or want to choose, your own power amplifier.\u003c\/li\u003e\n          \u003cli\u003eWant to use an integrated amplifier, or prefer not to house two 5U rack amplifiers.\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- COMPARISON --\u003e\n  \u003cdiv class=\"gl-grid\"\u003e\n    \u003ch2 class=\"gl-section-title\"\u003eSCM200ASLT vs Other ATC Active Models\u003c\/h2\u003e\n    \u003cdiv class=\"gl-block gl-w6\"\u003e\n      \u003ch3\u003eSCM200ASLT, SCM300ASLT and SCM150A Classic\u003c\/h3\u003e\n      \u003cdiv class=\"gl-body\"\u003e\n        \u003cdiv class=\"gl-scroll\"\u003e\n          \u003ctable class=\"gl-compare\"\u003e\n            \u003cthead\u003e\n              \u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth class=\"gl-on\"\u003eSCM200ASLT\u003c\/th\u003e\n\u003cth\u003eSCM300ASLT\u003c\/th\u003e\n\u003cth\u003eSCM150A Classic\u003c\/th\u003e\n\u003c\/tr\u003e\n            \u003c\/thead\u003e\n            \u003ctbody\u003e\n              \u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd class=\"gl-on\"\u003eTower\u003c\/td\u003e\n\u003ctd\u003eTower\u003c\/td\u003e\n\u003ctd\u003eClassic, on stand\u003c\/td\u003e\n\u003c\/tr\u003e\n              \u003ctr\u003e\n\u003cth\u003eBass drivers\u003c\/th\u003e\n\u003ctd class=\"gl-on\"\u003e2 × 314 mm SL\u003c\/td\u003e\n\u003ctd\u003e2 × 375 mm SL\u003c\/td\u003e\n\u003ctd\u003e1 × 375 mm SL\u003c\/td\u003e\n\u003c\/tr\u003e\n              \u003ctr\u003e\n\u003cth\u003eMid \/ HF\u003c\/th\u003e\n\u003ctd class=\"gl-on\"\u003e75 mm Super Dome \/ 25 mm\u003c\/td\u003e\n\u003ctd\u003e75 mm Super Dome \/ 25 mm\u003c\/td\u003e\n\u003ctd\u003e75 mm \/ 25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n              \u003ctr\u003e\n\u003cth\u003eCrossover points\u003c\/th\u003e\n\u003ctd class=\"gl-on\"\u003e380 Hz, 3.5 kHz\u003c\/td\u003e\n\u003ctd\u003e380 Hz, 3.5 kHz\u003c\/td\u003e\n\u003ctd\u003e380 Hz, 3.5 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n              \u003ctr\u003e\n\u003cth\u003eAmplification\u003c\/th\u003e\n\u003ctd class=\"gl-on\"\u003eExternal P4, 850 W\u003c\/td\u003e\n\u003ctd\u003eExternal P4, 850 W\u003c\/td\u003e\n\u003ctd\u003eBuilt in, 350 W\u003c\/td\u003e\n\u003c\/tr\u003e\n              \u003ctr\u003e\n\u003cth\u003eBass (−6 dB)\u003c\/th\u003e\n\u003ctd class=\"gl-on\"\u003e32 Hz\u003c\/td\u003e\n\u003ctd\u003e25 Hz\u003c\/td\u003e\n\u003ctd\u003e25 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n              \u003ctr\u003e\n\u003cth\u003eLinearity (±2 dB)\u003c\/th\u003e\n\u003ctd class=\"gl-on\"\u003e60 Hz to 12 kHz\u003c\/td\u003e\n\u003ctd\u003e50 Hz to 12 kHz\u003c\/td\u003e\n\u003ctd\u003e60 Hz to 17 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n              \u003ctr\u003e\n\u003cth\u003eMax. SPL (1 m)\u003c\/th\u003e\n\u003ctd class=\"gl-on\"\u003e118 dB\u003c\/td\u003e\n\u003ctd\u003e121 dB\u003c\/td\u003e\n\u003ctd\u003e117 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n              \u003ctr\u003e\n\u003cth\u003eSize (H × W × D)\u003c\/th\u003e\n\u003ctd class=\"gl-on\"\u003e1586 × 398 × 535 mm\u003c\/td\u003e\n\u003ctd\u003e1500 × 500 × 580 mm\u003c\/td\u003e\n\u003ctd\u003e884 × 498 × 568 mm, plus 200 mm stand\u003c\/td\u003e\n\u003c\/tr\u003e\n              \u003ctr\u003e\n\u003cth\u003eInput sensitivity\u003c\/th\u003e\n\u003ctd class=\"gl-on\"\u003e2 V\u003c\/td\u003e\n\u003ctd\u003e2 V\u003c\/td\u003e\n\u003ctd\u003e1 V, with rear trim\u003c\/td\u003e\n\u003c\/tr\u003e\n            \u003c\/tbody\u003e\n          \u003c\/table\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"gl-block gl-w2 gl-t2\"\u003e\n      \u003ch3\u003eChoose the SCM200ASLT If You\u003c\/h3\u003e\n      \u003cdiv class=\"gl-body\"\u003e\n        \u003cul class=\"gl-yes\"\u003e\n          \u003cli\u003eNeed a narrow speaker: 398 mm wide, versus about 500 mm for the other two.\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"gl-block gl-w2\"\u003e\n      \u003ch3\u003eChoose the SCM300ASLT If You\u003c\/h3\u003e\n      \u003cdiv class=\"gl-body\"\u003e\n        \u003cul class=\"gl-yes\"\u003e\n          \u003cli\u003eWant deeper bass: 25 Hz versus 32 Hz.\u003c\/li\u003e\n          \u003cli\u003eNeed more output: 121 dB versus 118 dB.\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"gl-block gl-w2\"\u003e\n      \u003ch3\u003eChoose the SCM150A Classic If You\u003c\/h3\u003e\n      \u003cdiv class=\"gl-body\"\u003e\n        \u003cul class=\"gl-yes\"\u003e\n          \u003cli\u003eWant the amplifiers inside the speaker, with no rack or speaker-to-amp cables to plan.\u003c\/li\u003e\n          \u003cli\u003eWant bass to 25 Hz from a shorter speaker on a stand.\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"gl-block gl-w6\"\u003e\n      \u003ch3\u003eNot Sure Which to Choose?\u003c\/h3\u003e\n      \u003cdiv class=\"gl-body\"\u003e\n        \u003cp\u003eThe SCM200ASLT or the passive \u003ca href=\"https:\/\/www.ttvjaudio.com\/products\/atc-scm200pt-passive-tower-speakers\" target=\"_blank\" rel=\"noopener\"\u003eSCM200PSLT\u003c\/a\u003e? Or the \u003ca href=\"https:\/\/www.ttvjaudio.com\/products\/atc-scm300aslt-active-tower-speakers\" target=\"_blank\" rel=\"noopener\"\u003eSCM300ASLT\u003c\/a\u003e or \u003ca href=\"https:\/\/www.ttvjaudio.com\/products\/atc-scm150a-active-classic-speakers\" target=\"_blank\" rel=\"noopener\"\u003eSCM150A Classic\u003c\/a\u003e? Todd can talk it through with you.\u003c\/p\u003e\n        \u003cdiv class=\"gl-cta\"\u003e\n          \u003ca class=\"gl-btn\" href=\"tel:+14062853910\"\u003eCall Todd: 406‑285‑3910\u003c\/a\u003e\n          \u003ca class=\"gl-btn gl-btn-alt\" href=\"https:\/\/www.ttvjaudio.com\/pages\/contact\"\u003eSend Todd a Message\u003c\/a\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- FINISHES --\u003e\n  \u003cdiv class=\"gl-grid\"\u003e\n    \u003ch2 class=\"gl-section-title\"\u003eAvailable Finishes\u003c\/h2\u003e\n    \u003cdiv class=\"gl-block gl-w6\"\u003e\n      \u003ch3\u003eChoose Your Finish\u003c\/h3\u003e\n      \u003cdiv class=\"gl-body\"\u003e\n        \u003ctable class=\"gl-specs\"\u003e\n          \u003ctr\u003e\n\u003cth\u003eStandard veneers\u003c\/th\u003e\n\u003ctd\u003eCherry, Walnut, Oak, Black Ash\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003cth\u003eStandard paints\u003c\/th\u003e\n\u003ctd\u003eSatin Black, Satin White\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003cth\u003ePremium veneers (up-charge)\u003c\/th\u003e\n\u003ctd\u003eRosewood, European Crown Cut Walnut, Pippy Oak, Burr Magnolia, Burr Poplar\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003cth\u003eHigh gloss (up-charge)\u003c\/th\u003e\n\u003ctd\u003eClear High Gloss Veneer, Piano Black, Piano White\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003c\/table\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- SETUP STEPS --\u003e\n  \u003cdiv class=\"gl-grid\"\u003e\n    \u003ch2 class=\"gl-section-title\"\u003ePlanning and Setup\u003c\/h2\u003e\n\n    \u003cdiv class=\"gl-block gl-step gl-w3\"\u003e\n      \u003ch3\u003e\n\u003cspan class=\"gl-num\"\u003e1\u003c\/span\u003eStep 1: Plan the Space\u003c\/h3\u003e\n      \u003cdiv class=\"gl-body\"\u003e\n        \u003cul\u003e\n          \u003cli\u003eEach speaker is 1586 mm tall, 398 mm wide and 535 mm deep.\u003c\/li\u003e\n          \u003cli\u003eEach P4 goes in a 19-inch rack (5U) or free-standing on sturdy shelving. Air enters at the back and leaves at the front, so never block either vent or enclose the amplifier.\u003c\/li\u003e\n          \u003cli\u003eThe P4's fans start when its heatsink reaches about 30 °C and keep running until it cools to about 20 °C, even in standby. Keep that in mind when choosing where it sits.\u003c\/li\u003e\n          \u003cli\u003eThe cable from each P4 to its speaker is 5 m as standard. 10 m cables are available, and runs up to 20 m are possible by splicing 4 mm² cable onto a 10 m cable.\u003c\/li\u003e\n          \u003cli\u003eEach P4 needs an earthed mains connection.\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"gl-block gl-step gl-w3\"\u003e\n      \u003ch3\u003e\n\u003cspan class=\"gl-num\"\u003e2\u003c\/span\u003eStep 2: Unpack and Position\u003c\/h3\u003e\n      \u003cdiv class=\"gl-body\"\u003e\n        \u003cul\u003e\n          \u003cli\u003eThese are large, heavy speakers: unpack them with a second person, in a large open space near their final position.\u003c\/li\u003e\n          \u003cli\u003eKeep the speakers away from corners and walls to reduce low-frequency problems.\u003c\/li\u003e\n          \u003cli\u003eCarpets, curtains and soft furnishings help control reflections in the midrange and treble.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp class=\"gl-note\"\u003eTodd can help you work out positions, cable runs and where the amplifiers should go before delivery.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"gl-block gl-step gl-w3\"\u003e\n      \u003ch3\u003e\n\u003cspan class=\"gl-num\"\u003e3\u003c\/span\u003eStep 3: Connect\u003c\/h3\u003e\n      \u003cdiv class=\"gl-body\"\u003e\n        \u003cul\u003e\n          \u003cli\u003e\n\u003cstrong\u003eP4 to speaker:\u003c\/strong\u003e one 8-way cable per speaker.\u003c\/li\u003e\n          \u003cli\u003e\n\u003cstrong\u003eSource to P4:\u003c\/strong\u003e a balanced XLR cable from your preamp or source to each P4 (pin 1 screen, pin 2 hot, pin 3 return). Plan on supplying your own XLR signal cables; Todd can confirm what's in the box.\u003c\/li\u003e\n          \u003cli\u003e\n\u003cstrong\u003eLevel:\u003c\/strong\u003e volume is set at your preamp or source.\u003c\/li\u003e\n          \u003cli\u003e\n\u003cstrong\u003eUnbalanced sources:\u003c\/strong\u003e use an XLR-to-RCA cable. If you hear hum, disconnect the screen at one end.\u003c\/li\u003e\n          \u003cli\u003e\n\u003cstrong\u003eMains:\u003c\/strong\u003e use the supplied lead and check the voltage shown on the P4's panel matches your supply.\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"gl-block gl-step gl-w3\"\u003e\n      \u003ch3\u003e\n\u003cspan class=\"gl-num\"\u003e4\u003c\/span\u003eStep 4: Power On\u003c\/h3\u003e\n      \u003cdiv class=\"gl-body\"\u003e\n        \u003cul\u003e\n          \u003cli\u003eSwitch on each P4 separately, one after the other, to limit the inrush current.\u003c\/li\u003e\n          \u003cli\u003eSet the rear isolation switch to ON, then press the front standby button once.\u003c\/li\u003e\n          \u003cli\u003eThe P4 runs its self-checks: the indicator changes from green to orange, blue flashes, red shows briefly as the mute releases, then the indicator settles on steady blue. It's ready to play. Start with the volume low and raise it gradually.\u003c\/li\u003e\n          \u003cli\u003eA short sound from the speakers when power is applied or removed is normal and harmless.\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"gl-block gl-step gl-w6\"\u003e\n      \u003ch3\u003e\n\u003cspan class=\"gl-num\"\u003e5\u003c\/span\u003eStep 5: Everyday Use\u003c\/h3\u003e\n      \u003cdiv class=\"gl-body\"\u003e\n        \u003ctable class=\"gl-specs\"\u003e\n          \u003ctr\u003e\n\u003cth\u003eStandby\u003c\/th\u003e\n\u003ctd\u003ePress the standby button: the blue light goes out and only green remains.\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003cth\u003eOccasional red during loud playback\u003c\/th\u003e\n\u003ctd\u003eThe P4 is briefly reducing gain to protect the drivers. Turn the level down a little.\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003cth\u003eSteady orange\u003c\/th\u003e\n\u003ctd\u003eA fault or power-up failure has shut the amplifier down. Press standby to restart; after overheating, let it cool first. If there's no response, check the rear fuse; if a replacement fuse also fails, call Todd.\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003cth\u003eCustom installation\u003c\/th\u003e\n\u003ctd\u003eA 5-pin remote interface on the P4 provides standby control and status outputs for a control system.\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003c\/table\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- SPECS --\u003e\n  \u003cdiv class=\"gl-grid\"\u003e\n    \u003ch2 class=\"gl-section-title\"\u003eSpecifications\u003c\/h2\u003e\n    \u003cdiv class=\"gl-block gl-w6\"\u003e\n      \u003ch3\u003eATC SCM200ASLT\u003c\/h3\u003e\n      \u003cdiv class=\"gl-body\"\u003e\n        \u003ctable class=\"gl-specs\"\u003e\n          \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003e3-way active floorstanding loudspeaker, four amplifier channels per speaker\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003cth\u003eDrivers\u003c\/th\u003e\n\u003ctd\u003eHF 25 mm dual-suspension S-Spec soft dome; Mid 75 mm Super Dome; LF 2 × 314 mm Super Linear\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003cth\u003eAmplitude linearity (±2 dB)\u003c\/th\u003e\n\u003ctd\u003e60 Hz to 12 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003cth\u003eCut-off (−6 dB, free-standing)\u003c\/th\u003e\n\u003ctd\u003e32 Hz and 20 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003cth\u003eDispersion\u003c\/th\u003e\n\u003ctd\u003e±80° horizontal, ±10° vertical, coherent\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003cth\u003eMax. continuous SPL (1 m)\u003c\/th\u003e\n\u003ctd\u003e118 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003cth\u003eCrossover\u003c\/th\u003e\n\u003ctd\u003e380 Hz and 3.5 kHz; 4th-order active, critically damped\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003cth\u003eInput\u003c\/th\u003e\n\u003ctd\u003eFemale XLR, balanced \u0026gt;10 kΩ, 2 V sensitivity\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003cth\u003eAmplifier output\u003c\/th\u003e\n\u003ctd\u003eBass 275 + 275 W, mid 200 W, high 100 W per speaker (ATC P4)\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003cth\u003eOverload protection\u003c\/th\u003e\n\u003ctd\u003eActive FET momentary gain reduction plus thermal tweeter protection\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003cth\u003eSpeaker cable\u003c\/th\u003e\n\u003ctd\u003e8-way cable per speaker, 5 m standard; 10 m available\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003cth\u003eDimensions (H × W × D)\u003c\/th\u003e\n\u003ctd\u003e1586 × 398 × 535 mm (62.44 × 15.67 × 21.06 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eTBA\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e6 years\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003c\/table\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"gl-block gl-w6\"\u003e\n      \u003ch3\u003eATC P4 Amplifier (One Per Speaker)\u003c\/h3\u003e\n      \u003cdiv class=\"gl-body\"\u003e\n        \u003ctable class=\"gl-specs\"\u003e\n          \u003ctr\u003e\n\u003cth\u003eOutput per channel\u003c\/th\u003e\n\u003ctd\u003eBass 1: 275 W into 8 Ω; Bass 2: 275 W into 8 Ω; Mid: 200 W into 16 Ω; HF: 100 W into 6 Ω (850 W total)\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003cth\u003eCrossover\u003c\/th\u003e\n\u003ctd\u003eActive, 380 Hz and 3.5 kHz, 4th order with phase correction\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003cth\u003eInput\u003c\/th\u003e\n\u003ctd\u003eBalanced XLR, 2 V sensitivity, \u0026gt;10 kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003cth\u003eFrequency response\u003c\/th\u003e\n\u003ctd\u003e5 Hz to 20 kHz, ±0.1 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003cth\u003eSignal-to-noise \/ crosstalk\u003c\/th\u003e\n\u003ctd\u003eBetter than 105 dB \/ better than 90 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003cth\u003eProtection\u003c\/th\u003e\n\u003ctd\u003eActive FET momentary gain reduction (soft limiting)\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003cth\u003eCooling\u003c\/th\u003e\n\u003ctd\u003eThree fans\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003cth\u003eMains\u003c\/th\u003e\n\u003ctd\u003e100, 115 or 230 V, 50\/60 Hz, set at the factory for your region\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003cth\u003ePower consumption\u003c\/th\u003e\n\u003ctd\u003e150 VA in standby, 1200 VA maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e19-inch rack mount, 5U (222 mm) high; 538 mm overall depth including front and rear handles\u003c\/td\u003e\n\u003c\/tr\u003e\n          \u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e35.8 kg (78.8 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003c\/table\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- CLOSING CTA --\u003e\n  \u003cdiv class=\"gl-grid\"\u003e\n    \u003cdiv class=\"gl-block gl-intro gl-w6\"\u003e\n      \u003ch3\u003eOrder Your ATC SCM200ASLT\u003c\/h3\u003e\n      \u003cdiv class=\"gl-body\"\u003e\n        \u003cp\u003eAs an authorized ATC dealer, TTVJ handles your order personally, from confirming the configuration to delivery. Reach Todd by phone or message to:\u003c\/p\u003e\n        \u003cul\u003e\n          \u003cli\u003eConfirm current pricing and availability\u003c\/li\u003e\n          \u003cli\u003eDiscuss a trade-in of your current speakers\u003c\/li\u003e\n          \u003cli\u003eAsk about financing and shipping\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cdiv class=\"gl-cta\"\u003e\n          \u003ca class=\"gl-btn\" href=\"tel:+14062853910\"\u003eCall Todd: 406‑285‑3910\u003c\/a\u003e\n          \u003ca class=\"gl-btn gl-btn-alt\" href=\"https:\/\/www.ttvjaudio.com\/pages\/contact\"\u003eSend Todd a Message\u003c\/a\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n\u003c\/div\u003e\n","brand":"ATC","offers":[{"title":"Active","offer_id":63876690018444,"sku":"SCM200ASLT","price":75999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0730\/3308\/9164\/files\/ATC-SCM200ASLT-speakers.jpg?v=1794868198","url":"https:\/\/www.ttvjaudio.com\/products\/atc-scm200aslt-active-tower-speakers","provider":"TTVJ Audio","version":"1.0","type":"link"}