Skip to product information
1 of 2

Accuphase

Accuphase A-48S Class A Stereo Power Amplifier

Accuphase A-48S Class A Stereo Power Amplifier

Regular price $14,975.00 USD
Regular price $14,975.00 USD Sale price $14,975.00 USD
Sale Sold out
Item may qualify for free US Shipping.
View full details

Class A Power in a Compact Chassis

The A-48S is a Class A, solid-state stereo power amplifier and the most compact of Accuphase's three Class A power amps. It replaces the A-48 in the same 465 × 211 × 464 mm chassis, with more power, lower noise and a higher damping factor: 50 W per channel into 8 ohms from six pairs of power MOS-FETs per channel.

Below 8 ohms it is rated at 100 W into 4 ohms, 200 W into 2 ohms and 400 W into 1 ohm (music signals), and its guaranteed damping factor of 1,000 matches Accuphase's top Class A models, the A-80 and A-300. Two units can be bridged as mono amplifiers of 200 W each into 8 ohms (music signals).

Class A, 50 WSix-pair MOS-FET push-pull per channel
50 / 100 / 200 / 400 WInto 8 / 4 / 2 / 1 Ω (below 8 Ω: music signals)
Bridged: 200 WInto 8 Ω, up to 800 W into 2 Ω (music signals)
Damping factor 1,000Up 25% from the A-48
118 dB S/NAt maximum gain; 123 dB at −12 dB
Compact Class A211 mm high, 464 mm deep, 34.8 kg

TTVJ is an authorized Accuphase dealer. You're buying through the brand's own dealer network, with advice from someone who has set up these amplifiers in real listening rooms.

Is It Right for You?

A Great Fit If You Want

  • Class A in a rack-friendly size: 211 mm high, 464 mm deep and 34.8 kg.
  • Grip on difficult loads: rated 200 W into 2 ohms and 400 W into 1 ohm (music signals), with a damping factor of 1,000.
  • To switch between two pairs of speakers: A and B speaker terminals with a front-panel speaker output selector.
  • A path to more power: add a second A-48S later and bridge the pair, or use two for bi-amping.

Consider Something Else If You Need

  • More Class A power: the A-80 and A-300 (see the comparison below).
  • High power or a cooler-running amp: Accuphase's Class AB P-4600 gives 150 W/ch and idles at 94 W, against the A-48S's 200 W; the P-7500 gives 300 W/ch.
  • One box instead of separates: Accuphase's Class A integrateds are the E-800S, whose power stage uses the same configuration as the A-48S, and the E-700.

Design

Six-Pair MOS-FET Output Stage

Each channel's output stage uses six parallel push-pull pairs of high-power MOS-FETs driven in Class A. The left and right power amplifier sections are built as separate mono-block units inside the chassis.

Balanced remote sensing takes feedback for both signal and ground close to the speaker terminals, and a MOS-FET switch (1.0 mΩ on-resistance) replaces mechanical relays in the speaker protection circuit. The guaranteed damping factor of 1,000 is 25% higher than the A-48's 800.

Low-Noise Input Stage

The input stage is a balanced instrumentation amplifier. Accuphase gives it most of the gain (12.6×) and leaves 2× to the power stage, which keeps noise low; the gain selector works in the input stage rather than through an attenuator. MCS+ runs the voltage amplification stage as two parallel circuits to reduce noise, and current-feedback topology keeps frequency response nearly unchanged as you switch gain.

Guaranteed output noise is 25.2 µV, 6% lower than the A-48's 26.8 µV, and S/N rises from 117 to 118 dB.

Power Supply and Protection

A large high-efficiency toroidal transformer feeds two custom 68,000 µF filter capacitors. The chassis stands on high-carbon cast iron insulators, under an aluminum top plate with a hairline finish.

A photo-coupler-isolated circuit detects speaker short circuits, temperature sensors on the heat sinks watch for overheating, and protection also responds to DC at the output. When it operates, the outputs are cut and the meters blink.

Controls and Meters

Two large analog power meters on a logarithmic scale (−∞ to +3 dB) include a −50 dB mark for low-level listening. The meter switch sets them to off, normal, or peak hold of 3 seconds or infinite.

The front panel has the input selector, the gain selector and the speaker output selector. The rear panel has the operation mode selector (normal, bridge or dual mono) and a polarity selector for the balanced input.

Connect It

Inputs, Outputs and Operating Modes

Inputs 1 balanced (XLR, 40 kΩ) and 1 line (RCA, 20 kΩ), chosen with the front-panel input selector; balanced polarity selectable
Speaker outputs A and B terminals with a front-panel speaker selector (A, B or A+B), for two pairs of speakers or bi-wiring. They take spade lugs from 7 to 16 mm or bare wire.
Gain selector MAX (28 dB), −3 dB (25 dB), −6 dB (22 dB), −12 dB (16 dB)
Stereo 50 W/ch into 8 Ω; 100 W/ch into 4 Ω; 200 W/ch into 2 Ω; 400 W/ch into 1 Ω (below 8 Ω: music signals). Loads of 2–16 Ω, or 1–16 Ω with music signals. With two pairs of speakers on A+B, each pair must be 4 Ω or more; bi-wired on A+B, 2 Ω or more.
Bridged (two units, one per channel) 200 W into 8 Ω; 400 W into 4 Ω; 800 W into 2 Ω (music signals). Loads of 4–16 Ω, or 2–16 Ω with music signals. Needs 1.59 V input for rated output.
Dual mono bi-amping (two units) Set both units to DUAL MONO, with one A-48S per speaker driving its low and high sections. The speakers need separate low and high inputs, and both amplifiers should be set to the same gain.

Setup Notes

  • Placement: it weighs 34.8 kg (41 kg boxed) and needs 464 mm (18.3 in) of depth and 211 mm (8.3 in) of height.
  • Heat: as a Class A amplifier it draws 200 W at idle and runs warm whenever it's on. Accuphase warns against installing it in a closed rack and asks for at least 15 cm of clearance around it, in a room no warmer than 35 °C.
  • Two units: for bridged or bi-amp use, set both amplifiers to the same gain.

Pairing

With a Preamplifier

At maximum gain the A-48S reaches full rated output with 0.80 V at its input (1.59 V when bridged). Accuphase's current preamplifiers, the C-3900S, C-2900 and C-2300, have a rated output of 2 V.

With high-efficiency speakers, try a lower gain setting so you use more of the preamp's volume range. The amp's own guaranteed S/N rises from 118 to 123 dB at −12 dB.

With an Accuphase Integrated

Accuphase's integrated amplifiers can bi-amp through their pre outputs, and they specify equal gain for both amplifiers. The power sections of the E-800S, E-700, E-4000, E-3000 and the earlier E-5000 all run at 28 dB, the same as the A-48S at its MAX setting.

Feed the A-48S from the integrated's pre out and let it drive one range of the speakers. The speakers need separate low and high inputs with a built-in crossover.

Reviews

High Fidelity (Poland)

"They've done this wonderfully, really wonderfully."
Wojciech Pacuła, High Fidelity, April 2025

Listening through an Ayon Spheris III preamp into Harbeth M40.1 speakers, Pacuła heard a deep, warm, saturated sound that was also fast, open and resolving, with a close, tangible midrange and strong, rhythmic mid-bass. He said that, heard blind, it could pass for a high-powered tube amplifier. His caveats: it has a character of its own rather than strict neutrality, it favors large sound planes over fine detail, the mid-bass is heavily saturated, bass contours are less sharply drawn, note attacks are slightly rounded, and the treble has a warm, golden tint.

Read the review: High Fidelity

A-48S vs. Accuphase's Other Class A Power Amps

A-48S, A-80 and A-300

A-48S A-80 A-300
Type Class A stereo Class A stereo Class A mono (two for stereo)
Output stage 6-pair MOS-FET 10-pair MOS-FET 20-pair MOS-FET
Power, 8 Ω 50 W/ch 65 W/ch 125 W
Power, 4 / 2 / 1 Ω (music signals) 100 / 200 / 400 W/ch 130 / 260 / 520 W/ch 250 / 500 / 1,000 W
Bridged, 8 Ω (music signals) 200 W (2 units for stereo) 260 W (2 units for stereo) 500 W (4 units for stereo)
Damping factor 1,000 1,000 1,000
S/N (max gain) 118 dB 123 dB 130 dB
Speaker terminals A and B, with selector Two pairs, same signal Two pairs, same signal
Spade lugs 7–16 mm 6.3–19 mm 6.3–19 mm
Meters Analog Bar graph and digital Bar graph and digital
Size (W × H × D) 465 × 211 × 464 mm 465 × 240 × 515 mm 465 × 240 × 515 mm
Weight 34.8 kg 44.6 kg 46.0 kg each
Idle power draw 200 W 211 W 230 W each

Choose the A-48S If You

  • Have a shallower or lower shelf: 464 mm deep and 211 mm high, vs 515 and 240 mm.
  • Need a lighter amp to place: 34.8 vs 44.6 kg (A-80).
  • Want to switch between two pairs of speakers: A/B selector; the others feed both pairs at once.

Choose the A-80 If You

  • Need more Class A power in one stereo chassis: 65 vs 50 W into 8 ohms.
  • Want a higher S/N rating: 123 vs 118 dB.
  • Use larger spade lugs: 6.3–19 mm vs 7–16 mm.

Choose the A-300 If You

  • Need the most Class A power: 125 W per channel, using one A-300 per channel.
  • Want the highest S/N rating: 130 dB.

Not Sure Which to Choose?

Deciding between the A-48S, A-80 and A-300, or how to match one to your preamp or integrated? Todd can talk it through with you.

Specifications

Accuphase A-48S Specifications

Type Class A solid-state stereo power amplifier
Rated output (20 Hz–20 kHz) Stereo: 50 W/ch into 8 Ω; 100 W/ch into 4 Ω*; 200 W/ch into 2 Ω*; 400 W/ch into 1 Ω*
Bridged: 200 W into 8 Ω*; 400 W into 4 Ω*; 800 W into 2 Ω*
*Music signals only
Output stage Six-fold parallel push-pull power MOS-FETs, Class A
Total harmonic distortion (20 Hz–20 kHz) Stereo: 0.05% (2 Ω); 0.03% (4–16 Ω)
Bridged: 0.05% (4–16 Ω)
Intermodulation distortion 0.01%
Frequency response At rated output: 20 Hz–20 kHz, +0/−0.2 dB
At 1 W: 0.5 Hz–160 kHz, +0/−3 dB
Damping factor 1,000 (stereo)
Gain 28 dB (MAX), 25 dB (−3 dB), 22 dB (−6 dB), 16 dB (−12 dB)
Input sensitivity Stereo: 0.80 V at rated output; 0.11 V at 1 W
Bridged: 1.59 V at rated output; 0.11 V at 1 W
Input impedance Balanced 40 kΩ; line 20 kΩ
S/N ratio (A-weighted, input shorted) 118 dB (gain MAX); 123 dB (gain −12 dB)
Power meters Analog, logarithmic, −∞ to +3 dB; off, normal or peak hold (3 s or infinite)
Inputs 1 balanced (XLR), 1 line (RCA)
Outputs Speaker terminals A and B, with selector (A, B, A+B)
Operating modes Normal (stereo), dual mono (bi-amping), bridged
Power requirements 120 V, 220 V or 230 V AC, 50/60 Hz, as marked on the rear panel
Power consumption 200 W idle; 220 W (IEC 62368-1); 0.3 W standby
Dimensions (W × H × D) 465 × 211 × 464 mm (18.3 × 8.3 × 18.3 in)
Weight 34.8 kg (76.8 lb) net; 41 kg in carton
In the box AC power cord (2 m)

Order Your Accuphase A-48S

As an authorized Accuphase dealer, TTVJ handles your order personally, from confirming the configuration to delivery. Reach Todd by phone or message to:

  • Confirm current pricing and availability
  • Discuss a trade-in of your current amplifier
  • Ask about financing and shipping