Skip to product information
1 of 2

Accuphase

Accuphase C-57 Phono Preamplifier

Accuphase C-57 Phono Preamplifier

Regular price $13,975.00 USD
Regular price $13,975.00 USD Sale price $13,975.00 USD
Sale Sold out
Item may qualify for free US Shipping.
View full details

A Fully Balanced MC/MM Phono Preamplifier

The C-57 is Accuphase's standalone stereo phono amplifier: a solid-state, fully balanced MM/MC phono preamplifier, balanced from input to output, with each channel built as a separate mono amplifier. It replaces the C-47 and is the fourth generation of Accuphase's standalone phono equalizers, which began with the C-27 in 2008.

New on the C-57, the MC head amplifier uses ANCC to cancel its own noise and distortion, bringing input-referred noise down to −156 dBV. A dedicated balanced MC input connects a balanced tonearm cable, three unbalanced phono inputs take MM or MC, and seven MC and three MM load settings cover a wide range of cartridges, including very low-output MCs. The C-57 remembers its settings for each input.

Fully balanced, solid stateSeparate mono construction for each channel
ANCC in the MC head amp−156 dBV input-referred noise
1 balanced MC + 3 phono inputsSettings remembered for each input
7 MC loads, 10 Ω–1 kΩ3 MM loads: 1, 47, 100 kΩ
MC 64/70 dB, MM 34/40 dBHigh-gain setting for low-output cartridges
Dual-mono power supplyA toroidal transformer per channel, 8 × 15,000 µF

TTVJ is an authorized Accuphase dealer. You're buying through the brand's own dealer network, with advice from someone who has set up these components in real listening rooms.

Gain, Loading and Cartridge Matching

Settings as Accuphase Specifies Them

MC, normal (64 dB) Input sensitivity 1.26 mV for 2 V output; maximum input 5.7 mV; S/N 98 dB
MC, high (70 dB) Input sensitivity 0.63 mV; maximum input 2.9 mV; S/N 92 dB
MM, normal (34 dB) Input sensitivity 40 mV; maximum input 180 mV; S/N 108 dB
MM, high (40 dB) Input sensitivity 20 mV; maximum input 90 mV; S/N 102 dB
MC load 10, 30, 60, 100, 200, 300 Ω or 1 kΩ, shown on a 7-segment display
MM load 1, 47 or 100 kΩ
The high-gain setting adds 6 dB for low-output cartridges. MC/MM, gain, load and the subsonic filter are set from the front panel, and the C-57 remembers its settings for each input. As an example, Accuphase's AC-6 (0.4 mV, load 100 Ω or higher) gives about 0.63 V out at 64 dB or 1.26 V at 70 dB, well inside the maximum input at either setting. Accuphase doesn't specify MM input capacitance. Not sure where to start with your cartridge? Todd can help.

The Balanced MC Input

The balanced input is for MC cartridges only, with a tonearm cable terminated in XLR. A balanced connection reduces noise picked up along the cable. MM cartridges aren't suited to it: their shield is tied to one signal polarity, so the noise cancelling doesn't work, and Accuphase recommends the regular inputs for MM.

Connecting It

The balanced (XLR) and line (RCA) outputs deliver 2 V from 50 Ω, into loads of 10 kΩ or more. Feed a preamplifier or integrated amplifier's line or balanced input; with the C-3900S, use its dedicated AD inputs. The polarity selector inverts the balanced output to match your preamp.

Power Supply

Separate Supplies for Each Channel

Each channel has its own low-leakage toroidal transformer and a low-noise regulated supply that is unaffected by load changes, with eight 25 V/15,000 µF filter capacitors in all. Keeping the head amplifier, equalizer amplifier and power supply separate for left and right prevents interference between channels and improves separation.

Is It Right for You?

A Great Fit If You Want

  • A balanced tonearm connection: a dedicated balanced MC input.
  • Wide MC loading: seven settings from 10 Ω to 1 kΩ, including 60 Ω, new on the C-57.
  • MM loading options: 1, 47 or 100 kΩ.
  • Up to four turntables or arms: four inputs (one is the MC-only XLR input), each remembering its settings.
  • Phono for a preamp without it: the C-3900S has no phono option and dedicated AD inputs for an external stage.

Consider Something Else If You Need

  • Phono inside a C-2900: the AD-2900 module installs in its rear slot.
  • Phono inside a C-2300 or Accuphase integrated: the AD-60 board fits their option slots.

C-57 vs. Accuphase's Built-In Phono Options

C-57, AD-2900 and AD-60

C-57 AD-2900 AD-60
Form Standalone, own power supply Module for the C-2900 and earlier preamps Board for the C-2300 and integrateds
MC gain 64 / 70 dB 64 / 70 dB 66 dB
MM gain 34 / 40 dB 34 / 40 dB 40 dB
Gain selector Yes Yes No (fixed)
MC loads 10–1,000 Ω (7) 10–300 Ω (5; fewer in older preamps) 30–300 Ω (4)
MM loads 1, 47, 100 kΩ 47 kΩ 47 kΩ

Choose the C-57 If You

  • Use a balanced tonearm cable: a dedicated balanced MC input.
  • Need 60 Ω, 1 kΩ or MM loading choices: not offered by the others.

Choose the AD-2900 If You

  • Own a C-2900: phono inside the preamp, set from its front panel, with no extra box or cables.

Choose the AD-60 If You

  • Own a C-2300 or an Accuphase integrated: it fits their option slot.

Not Sure Which to Choose?

Deciding between the C-57, an AD-2900 in a C-2900, or an AD-60 in a C-2300? Todd can talk it through with you.

Design

Head Amplifiers

The MC head amplifier uses eight low-noise bipolar transistors in parallel at its input, with current feedback and ANCC: a sub-amplifier detects and cancels the main amplifier's noise and distortion. The MM head amplifier uses three low-noise J-FETs in parallel with current feedback.

Equalizer and Build

A balanced equalizer amplifier holds RIAA deviation within ±0.3 dB from 10 Hz to 20 kHz, on glass-fiber-cloth fluorocarbon boards. A 10 Hz, −12 dB/octave subsonic filter can be switched in for warped records. New rotary switches select inputs and loads. The chassis has an aluminum hairline top plate, natural wood-grain side panels and high-carbon cast iron insulators.

Specifications

Accuphase C-57 Specifications

Type Solid-state, fully balanced MM/MC phono preamplifier
Inputs 1 balanced (MC only); 3 unbalanced phono
Outputs 1 balanced (XLR), with polarity selector; 1 line (RCA)
Gain MC 64 dB (70 dB high); MM 34 dB (40 dB high)
Input impedance MC 10, 30, 60, 100, 200, 300 Ω, 1 kΩ; MM 1, 47, 100 kΩ
Input sensitivity (rated output) MC 1.26 mV (64 dB), 0.63 mV (70 dB); MM 40 mV (34 dB), 20 mV (40 dB)
Maximum input (1 kHz, 0.005% THD) MC 5.7 mV (64 dB), 2.9 mV (70 dB); MM 180 mV (34 dB), 90 mV (40 dB)
S/N (input shorted, A-weighted) MC 98 dB (64 dB), 92 dB (70 dB); MM 108 dB (34 dB), 102 dB (40 dB)
Input-referred noise MC −156 dBV; MM −136 dBV
RIAA deviation ±0.3 dB (10 Hz–20 kHz)
Total harmonic distortion 0.005% (1 kHz, rated output)
Rated output 2 V, 50 Ω (balanced and line); maximum 8.0 V; load 10 kΩ or more
Crosstalk −90 dB or better (10 kHz)
Subsonic filter 10 Hz, −12 dB/octave
Power requirements 120 V, 220 V or 230 V AC, 50/60 Hz, as marked on the rear panel; 230 V version has an eco mode that switches off after 120 minutes
Power consumption 22 W
Dimensions (W × H × D) 465 × 114 × 407 mm (18.3 × 4.5 × 16.0 in)
Weight 14.8 kg (32.6 lb) net; 21 kg in carton
In the box ASL-10B audio cable (1 m); AC power cord (2 m); cleaning cloth

Order Your Accuphase C-57

As an authorized Accuphase dealer, TTVJ handles your order personally, from confirming the configuration to delivery. Reach Todd by phone or message to:

  • Confirm current pricing and availability
  • Discuss a trade-in of your current phono stage
  • Ask about financing and shipping