Dynaudio has been creating speakers that perform out of
all proportion to their physical size for over 40 years, and Evoke 10 is
no exception. These are serious hi-fi… built for serious entertainment.
Classic Dynaudio heritage… with a twist
speaker’s single 14cm long-throw mid/bass driver is made from MSP
(Magnesium Silicate Polymer), just like all Dynaudio speakers have used
for decades. They use new surrounds to extend their throw, their
frequency response and their low-frequency dynamics – all while
maintaining stellar midrange performance.
Want to know the woofer’s secrets? The diaphragm is 0.4mm thin, which
provides exactly the right combination of lightness, stiffness and
damping to ensure optimum performance. It’s made of one piece (the
dust-cap is part of the playing surface), and is bonded directly to the
rigid glass-fibre voice-coil former directly under the Balance Ribs
you’ll see around the centre dome. That means the whole unit moves as
one, in a predictable (and carefully tuned) way, for a performance that
strikes the ideal balance between bass and midrange.
The 38mm voice-coil itself is made from aluminium, making it
extremely light. That means we can use more windings. More windings
gives us more control over the cone’s movement, which means more control
over the sound – even at high volumes and high frequencies. It’s kept
stable, centred and true by the Nomex spider (the circular spring
assembly that stops the cone moving when it shouldn’t, and lets it move
when it should).
And the whole assembly is driven by one of our new, powerful strontium carbonate Ferrite+ ceramic magnet systems.
Cerotar: a brand-new tweeter
Up top is the
brand-new 28mm Cerotar soft-dome tweeter. Our engineers looked behind
the curtain of the award-winning Special Forty and money-no-object
Confidence tweeters and cherry-picked some key technologies to bring to
Evoke. The headline-grabbing component is the Hexis – an ingenious inner
dome that refines the airflow behind the playing surface to smooth-out
its frequency response and eliminate unwanted resonances.
The Cerotar, like the woofer, is powered by a powerful Ferrite+ ceramic magnet assembly.
Linking the drivers together is a high-grade second-order crossover
that uses the Confidence’s design with different components. So, yes,
when we say you’re getting high-end tech, we mean it.
Honest Danish design
Evoke 10 is available in
four beautiful finishes: Black High Gloss, White High Gloss, Walnut Wood
and Blonde Wood. The shiny versions really are just that: new
lacquering techniques have resulted in a sumptuous, almost glass-like
finish. The wood versions use a tactile, open natural veneer for either a
warm, dark tone or a light apricot look.
You might notice that you can’t see any mounting screws. Evoke has
simple, clean trim rings that emphasise the cabinet’s finish as well as
the moving parts of the drivers. The rings are one-piece moulded, with
the surface finish embedded in the moulding process – so what we make is
what you get.
Clean, beautiful and honest. How very Danish.
It means you can take them with you when you move… and, we trust, enjoy them for a lifetime.
Brand-new Cerotar tweeter
A 28mm precision-coated soft-dome design derived directly from the award-winning Special Forty and the mighty new Confidence series. The new motor system uses strontium carbonate Ferrite+ ceramic magnets for improved sensitivity.
An ingenious inner tweeter dome that further smooths out the tweeter’s frequency response and minimises resonances – so all you get are the desirable ones. You’ll also find Hexis in the all-new Confidence.
New Esotec+ woofers
New long-throw designs for improved frequency response and low-frequency dynamics. They’re all made from MSP – a material we developed in-house and have used in our high-quality drivers for decades.
Timeless Danish design
Simple, clean, traditional, modern and luxurious. All at once. We’ve made sure Evoke is realistic for, and sympathetic with, real homes and real lives. It’s available in four finishes: Black High Gloss, White High Gloss, Walnut Wood and Blonde Wood.
Sensitivity: 84dB (2.83V/1m)
IEC power handling: 160W
Impedance: 6 Ω
Frequency response (±3dB): 47Hz–23kHz
Box principle: Bass reflex rear ported
Crossover frequency: 1400Hz
Crossover topology: 2nd order
Woofer: 14cm MSP cone
Tweeter: 28mm Cerotar with Hexis
Dimensions (W x H x D): 180x315x266mm
Dimensions with feet/grille (W x H x D): 180x315x277mm