 |
With the development of the new AFDS (Air Film Damping System), we have achieved sound quality that has both the sensitive high ranges of planar magnetic models and the volume and open feel bass tones of dynamic models. This is a product that will have you making new discoveries from music you're used to listening to, and will have you wanting to listen to your favorite music over and over, reaffirming the pleasure that audio products bring. D8000
Housing Aluminum magnesium alloy Driver AFDS Planer Magnetic Sensitivity 98dB/mW Impedance 60Ω Weight 523g Cord length 1.5ｍ/3m Sound quality overwhelmingly real sound not experienced until now Features A combination of the sensitive high ranges of planar magnetic models
and the volume and open feel bass tones of dynamic models.
“Volume and open feel bass tones”
With conventional planar magnetic models, amplitude is an increasing low range, and since the diaphragm comes into contact with magnets, it was necessary to raise the frequency of bass tones to a level that the driver unit can reproduce. To make up for the lack of bass tones, the inside of the earpads have been tightly sealed, and the front section of the diaphragm has been made a closed space.
This is the same principle as earphones with sealed earpieces being able to reproduce bass frequncies despite their small size. By sealing the inner earpads, it is possible to produce bass tones across low frequency bands; these become the bass tones produced within a sealed space the same as earphones.
With D8000, the problem with the diaphragm coming into contact with magnets has been solved through AFDS (Air Film Damping System), and it has become possible to reduce the frequency of the bass tones
that the driver unit can reproduce. Combined with breatheable earpads, bass tone reproduction with a volume
and open sound only achievable with superior dynamic models is possible.
“Subtle high frequencies”
In reproducing subtle high frequencies, the lightweight nature of the diaphragm comes before anything else. Compared to other dynamic models with the same diameter, D8000's diaphragm is 1/3 lighter. A super thin aluminum coil has been etched on the extremely lightweight film diaphragm, and as such, the adhesive essential for use between the coil and the diaphragm of dynamic models - which has a very negative effect
on sound quality - is not necessary. This is an important part, packed with know-how. With D8000, this
problem is solved theoretically, and reproduction of subtle high frequencies has been achieved.
“The combination of the planar magnetic model's subtle high frequencies
and the dynamic model's volume and open bass tones”
With a combination of the planar magnetic model's subtle high frequecies and the dynamic model's volume and open bass tones, you discover new things about music you're used to listening to when you use D8000; they have you wanting to listen to your favorite music over and over again. With this product, you realize
that high sound quality provides the impetus for experiencing the deeper aspects of music.
Newly-developed AFDS: Air Film Damping System
With conventional planar magnetic models, amplitude was an increasing low range, and the diaphragm came into contact with magnets. To solve this problem, we took measurements by conducting diaphragm simulations using the finite element method and laser Doppler devices numerous times, and estabished new diaphragm braking technology known as AFDS - Air Film Damping System. In doing so, the shortcoming of planar magnetic models - the low reproducibility of bass tones - was solved. This technology could be considered a reinvention of planar magnetic models. With D8000, the problem with the diaphragm coming into contact with magnets has been solved through AFDS (Air Film Damping System), and it has become possible to reduce the frequency of the bass tones that the driver unit can reproduce. Combined with breatheable earpads, bass tone reproduction with a volume and open sound only achievable with superior dynamic models is possible.
Designed with prolonged use and ease of repair in mind
So as to make repairs and future upgrades possible, almost every part has been designed in such a way that they can be disassembled, ensuring that the product can be used for many years following purchase.
A machined aluminum magnesium alloy housing
To establish AFDS, an extremely high level of precision compared to typical driver units is necessary. Because of this, the machined aluminum magnesium alloy housing has been machined with great precision. By applying the kind of leather coating finish used with high-quality cameras, we've also taken measures against minute vibrations.
Newly-developed detachable cable
We've developed a new cable for the D8000. Two kinds of cable are included – a 3.5mm mini plug type (1.5m) and a 6.3mm standard plug type (3m).
|
|
|
Best Headphone Ever ! 
